How to improve the Security Labels and Bags of knowledge rate
Security Labels and Bags technology is the world's widely used automatic identification and electronic computer data input wrist, is the efficiency of the management tools. The quality of the safety label and the bag print is the same as the quality of the product itself. The qualified security label and the bag symbol are the necessary guarantee for the automatic management of the POS system. We see the relevant departments of the printing enterprises to implement safety labels and bags logo printing qualification system, and test printing and formal printing of the test products and products to stop testing to ensure that the Security Labels and Bags printing quality, conditional use of safety Labels and bags to detect safety labels and bags to stop testing, at least to ensure that safety labels and bags in the B above; but, after this situation is easy to ignore, a local product safety labels and bags in the printing business after printing, tested as qualified , And in the process of the use of members of the system and the flow to the hands of businesses, but become a substandard goods, should cause the attention of system members.
Usually have the following conditions need to pay attention to the situation, pay attention to the following aspects of the problem, we can fully improve the Security Labels and Bags of reading:
First, the product shape design is not correct Common is the beverage, especially polyester bottled drinks, concave and concave shape, and Security Labels and Bags symbols are usually printed on plastic labels, labels attached to the bottle, but also with the bottle shape The formation of Security Labels and Bags symbols can not be properly read. This situation should be in the design of the bottle shape, to ensure that the label is smooth.
Second, the local bags of goods, the security label and the bag symbol printed near the edge of the bag, although the printing after the inspection qualified, but after loading the contents of the deformation, wrinkled, still can not correctly read the safety labels and bags. The correct way is to design the Security Labels and Bags position to avoid the joints, deformation parts, it is best to first fill the contents of the bag after the inspection of its flat parts, and then in this position printing safety labels and bag symbols.
Third, the local boxed goods, box tiles to check the Security Labels and Bags signs qualified, but when the carton folded, but the security label and bag symbols cover a part, or left and right blank area lack. This should be thoughtful when designing safety labels and bag positions.
Fourth, for the pursuit of goods on the file promotion, a large part of the product put on the shrinking film, but also the formation of Security Labels and Bags of substandard situation. After the heat shrinkable film shrinks, it can not be contracted and flattened at the corner of the product, and the safety label and the bag symbol in this position can not be correctly read.
Fifth, the special commodity frozen food, such as ice cream, etc., after the removal of the cold, the appearance of condensation due to a thin layer of ice at low temperature, all or part of the cover of the security label and bag symbols, resulting in correct reading. Such goods are seasonal, short-term, should use the store code.
Sixth, the goods and then mark the other content to form a Security Labels and Bags unqualified common food labeling consumption date, consumption lot number, shelf life and other content is incorrectly marked on the security label and bag symbol. Boxed food using printing ink, with manual printing machine to stop labeling, and some boxes on the Security Labels and Bags location design and labeling date position corresponding to the other side, and printing ink after printing dry demand for a period of time, Quick drying ink to be 2 to 5 seconds, slow drying ink with more than 5 seconds. When the box is pushed after the date marked, the dry ink will pollute the safety label and the bag symbol on the other box, stack a few contaminants, make a stain, and can not read it correctly. This should be done when designing the Security Labels and Bags position Pay attention to.
Seventh, some goods, especially children's goods, in the shrinking film and the goods between the signs, small toys, etc., to absorb the customer, the common is the bubble gum put flat plastic, often the Security Labels and Bags symbol local and all Cover, the formation can not read.
Eighth, special goods frozen food, such as ice cream, etc., after the removal of the cold, the appearance of condensation due to a thin layer of ice at low temperatures, all or part of the cover of the security label and bag symbols, resulting in correct reading. Such goods are seasonal, short-term, should use the store code.
In short, to ensure the Security Labels and Bags of reading rate, not only to the Security Labels and Bags of the printing process to stop control, but also on the Security Labels and Bags of printed materials to control the process, as long as the Security Labels and Bags printing until Security Labels and Bags symbols of goods through the POS system sales come in this whole process to stop attention, to effectively promote the Security Labels and Bags of reading progress.
- The Factors Affecting The Shrinkage...
- Causes Of Scorch
- Rubber Knowledge
- The Sealing Industry Development
- Rubber Aging Factor
- Silica Gel Development Prospects
- Rubber Maintenance Of Common Sense
- Classification For Rubber Mold
- Foamed Silicone Common Sense
- Door Ventilation How To Seal
- The Effect Of The Thermal Transfer ...
- Security Seals Removal Method
- How To Identify The Heat Thermal Tr...
- What Are The Advantages Of Tote Con...
- Thermal Transfer Ribbon Structure
- How To Use Tote Container Boxes And...
- Logistic Packing And Transportation...
- How Does Thermal Transfer Ribbon Af...
- Tote Container Boxes And Plastic Cr...
- The Future Logistic Packing And Tra...